2 liter bottle

Instrumental disinfectant, it is used by immersion (it is placed in the solution), it cannot be sprayed or wiped with it. It is used diluted. It is a high level disinfectant. It is no longer necessary to put the instrument in an incubator or autoclave.
Do not use on surfaces, it contains substances that can be toxic if dispersed in the air. Disinfection of instruments must be done in tubs with lids.

Characteristics:
Gigasept FF (new) is a high-level disinfectant/cold chemical sterilizer based on succinic dialdehyde for disinfection and cleaning in one step. (CE 0297)
Our advantage
- corresponds to the requirements of the latest European standards, thus having a wide spectrum of activity;
- mycobactericidal, virucidal, tuberculocidal, bactericidal and sporicidal;
- tested under conditions of high protein load, therefore being suitable for removing strong contamination;
- without formaldehyde;
- excellent compatibility with materials - the solution is stable for 14 days.
Aplication domain
Used for manual disinfection and cold chemical disinfection/sterilization of surgical instruments and sensitive medical instruments. Especially recommended for thermosensitive and thermostable endoscopes (flexible and rigid) and ultrasonic probes.
Suggestions for use
- Do not combine with a thermochemical process based on quaternary ammonium compounds or amines. For example, in this case, aldehyde-based products are preferred.
- In addition to the manual processing of endoscopes and instruments, gigasept FF (new) is also recommended for semi-automatic and fully automatic machines that operate at room temperature through a closed circuit process.
Methods/Instructions for application
- Make sure that the devices to be treated are completely immersed without air gaps. After the contact time has expired, rinse the instruments with water of an appropriate quality depending on the subsequent use of the instruments or equipment (eg, sterile water).
- Thus interactions and unwanted effects can be avoided in the subsequent manual or mechanical treatment.
Cleaning/disinfection
The cleaning action of gigasept FF(new) can be
substantially improved with products to enhance the cleaning process developed especially for gigasept FF (new). For cleaning and disinfection without fixing the proteins, it is recommended to add 1% cleaning potentiator or gigazyme to the prepared working solution.
Compatibility with materials
Gigasept FF(new) is compatible with materials such as:
- metals
- rubber
- the bottle
- porcelain
- plastic
- flexible endoscopes
Microbiological action
- bacteria (including mycobacterium and m. tuberculosis) and fungi
- sporicide
- virucidal*
Technical data
Composition
100 g gigasept FF (new) contain: 11.9 g succinic acid dialdehyde, 3.2 g dimethoxytetrahydrofuran
Labeling according to Regulation (EC) no 648/2004: <5% phosphonates, <5% anionic surfactants, <5% non-ionic surfactants, perfume, methylisothiazolinones.
Other ingredients: solubilizers, ph regulators, corrosion inhibitors, dyes
Physico-chemical data: Concentrate
Appearance: clear green liquid
Density (20°C): 1.01 g/ml
pH value: approx. 6.5
2% working solution
Appearance: clear light green liquid
pH value: approx. 6.5
Working solution 8%
Appearance: clear light green liquid
pH value: approx. 6.5
gigasept FF (new) meets the requirements of the following European standards:
- EN 13727/EN 14561
- EN 13624/EN 14562
- EN 14348/pr EN 14563
Labeling in accordance with CE norms
(applicable to concentrate)
Xn: Harmful
R20/21/22: Harmful by inhalation, in contact with skin or if swallowed
R68/20/21/22: Harmful: Possible risk of irreversible effects by inhalation, in contact with skin or if swallowed
R36: Irritating to eyes
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S36/37: Wear suitable protective clothing and gloves
Special notes
It is recommended to use nitrile or butyl gloves when using disinfectants. Do not store for long periods at temperatures above 25° C. Do not use after expiration. The recommended usage times will not be exceeded.
Delivery method
Individual packaging Collective packaging
2 liter bottle 5 x 2 liters
Canister of 5 liters 1 x 5 liters
Dosing accessories Individual packaging
- Dispenser bottle 2l (20 ml/overturn)
- Faucet canister 5l
- Key canister 5l
- 5l canister dispenser (20 ml/press)
- 50 ml measure
- 500 ml measure
Environmental information
Schulke owns economical, advanced and safe production processes, protecting the environment and at the same time maintaining advanced quality standards.
Gigasept FF (new) is a concentrate with an optimized formula resulting in an economical way of packaging in terms of transport and storage.
Due to the usage time of 14 days, the burden on the residual water is considerably reduced compared to the case of solutions that are changed daily.